Lankhorst Ropes Coating Innovation Replaces Abrasion Resistance Jacket for Easier Rope Handling

15 February 2012
Leading maritime ropes supplier, Lankhorst Ropes has developed an innovative, abrasion resistant coating for its LANKO®FORCE ropes, simultaneously improving abrasion resistance and making the rope easier to handle. The Challenger coating is an alternative to the protective jacket normally used to safeguard the rope during handling.

LANKO®FORCE is a 12 strand braided rope, made of Dyneema® yarns. Comparable in strength to that of conventional steel wire rope, yet weighing up to 7 times less, LANKO®FORCE is an excellent alternative to heavy and lumbersome steelwire ropes in situations requiring manual handling of the rope. Until now the LANKO®FORCE rope construction included a non-load, bearing protective jacket to reduce the effects of abrasion. However, while this is effective in protecting the rope, in the event the jacket becomes damaged the rope has to be taken out-of-service and repaired.

The Lankhorst developed Challenger rope coating is designed to replace the
LANKO®FORCE's  protective jacket along the body of the rope, while retaining a jacket for the high wear, splice eye. The low-friction coating is applied to the rope during production and has been shown in trials to significantly reduce the effects of abrasion. Moreover, the absence of the jacket means the LANKO®FORCE rope requires less maintenance, is simpler to inspect, and even easier to handle.

“The LANKO®FORCE Challenger coated rope is an important development in our drive to introduce technical improvements that have a clear business benefits in rope performance and handling,” says Hans-Pieter Baaij, manager Maritime Division, Lankhorst Ropes.
 
For more information on maritime ropes from Lankhorst Ropes call +31 (0)515 487698, and email maritime@lankhorstropes.com. Details of the full range of Lankhorst Ropes can be found at www.lankhorstropes.com.
 
 
 
 
 
 

Member of the Royal Lankhorst Euronete group